KQTL Series Product Presentation
KQTL(R) series desulfurization pumps are single-stage single-suction horizontal centrifugal pumps, developed by Kaiquan Pump Group for desulfurization purification devices of coal-fired units in thermal power plants. They are mainly used as circulation pumps for absorption towers in wet FGD devices to convey limestone and gypsum slurries. The products draw on features of similar domestic and foreign products. They are safe and reliable when operating...
KD/KTD Series Multistage Centrifugal Pump
KD series pump is horizontal, multistage, sectional type centrifugal pump in accordance with API610.The pump structure is BB4 of API610 standard.
KTD series pump is horizontal, multistage, double-casing pump. And the inner is sectional type structure. It is also in accordance with API610 and its structure is BB5.
Features:
1. The suction pipe and discharge pipe are both set straight up with horizontal central support structure.
2. The allowe...
VCP Series Vertical Turbine Pump
VCP vertical pump is a newly developed product with both homeland and overseas advanced experience in design and manufacture. It is used to deliver clear water, sewage with certain solid water and seawater with corrosive. The temperature of liquid can’t be above 80 ℃. It is widely used in original water works, waste water factory, metallurgy and steel industry (especially suitable for delivering oxygenation iron sheet water in swirl pool, power stati...
ZLB/HLB Vertical Axial Flow Pump, Mixed Flow Pump
This series of pumps performance coverage is wide. The models and specification is complete. The series of pumps are suitable for various work conditions.
Traditional structure without transmission shaft can meet different requirement:
1. Traditional type pumps: Meet old hydraulic design and old pump station updating.
2. No transmission shaft: The traditional pump station mixed or axial flow pump installation form is double base inst...
AY Series Centrifugal Oil Pumps
AY series centrifugal pumps are designed and optimized based on old Y type pumps. It is a new kind of product to meet the modern construction request. It has higher efficiency and It is an energy conservation pump. On the condition of not affecting the product interchangeability, we optimize some unreasonable components to make it better.
Features:
1. For bearing body, we replace 35,50,60 bearing bodies of old Y type pump with 45,55,70 bearing bodies which hav...
2BEK Series Water Ring Vacuum Pumps
2BEK series water ring vacuum pump is a new generation of high efficiency and energy saving product developed by Shanghai Kaiquan pump (Group) Co., Ltd. It is usually used to pump gas without solid particles, insoluble or slightly soluble in working fluid. The working fluid is generally clean water at normal temperature.
2BEK series products have the following characteristics:
1. Remarkable energy saving effect
2. Stable operation and high reliabi...
YS Vacuum Water Diversion Device
YS series type A automatic vacuum water diversion complete equipment, Model of control cabinet is KQK—YS110-2AN (N represents the number of water pumps).
1. The start and stop of the water pump is controlled by the water pump control cabinet; The solenoid valves inside the vacuum system and on the vacuum pipeline of the water pump are controlled by the vacuum system control cabinet. When the water pump is in standby state, the normally closed solenoi...
KZJXL Series Submerged Slurry Pumps
KZJXL series submerged slurry pumps are new-type light submerged slurry pumps developed by the company based on the KZJL series pumps. They are vertical cantilever-type single-stage single-suction centrifugal pumps. Their impellers are semi-open impellers with mixing blades at the extension of the impeller’s suction side which can facilitate the transportation of viscous liquids with large particles.
Application:
The pumps are mainly used for pump...
KQA Series Multistage Pump with Axial Spilt Casing
KQA series pumps are designed and made in accordance with API610 th10 (Centrifugal Pump for Petroleum, chemical and natural gas). It can be used for wicked work condition like high temperature, low temperature and high pressure. The casing is equipped with a volute, center line support with symmetrical impellers. Even if there is no balance plate or balance drum, the axial force can also be removed. So it is more reliable to deliver...
XBD Series Double Suction Firefighting Pump
Introduction:
XBD series electric horizontal double suction fire pump set is a product developed by our company according to the market demand. Its performance and technical conditions meet the requirements of national standard GB 6245 fire pump. The products have been tested by the national fire protection preparation quality supervision and testing center, and passed the appraisal of new products in Shanghai, and obtained the Shanghai fire protec...
KQSS/KQSW Series Double Suction Pump
KQSS: Smart energy efficient type
KQSW: high-speed positive pressure type
Product Overview:
KQSS/KQSW series single-stage double-suction horizontal split high-efficiency centrifugal pumps are new generation of double-suction pumps. The series incorporate energy conservation and efficiency boosting technology developed by Kaiquan, drawing from state of the art technologies similar products. This new generation products, based on the most advanced CFD fluid...
ZLB/HLB Vertical Axial Flow Pump, Mixed Flow Pump
This series of pumps performance coverage is wide. The models and specification is complete. The series of pumps are suitable for various work conditions.
Traditional structure without transmission shaft can meet different requirement:
1. Traditional type pumps: Meet old hydraulic design and old pump station updating.
2. No transmission shaft: The traditional pump station mixed or axial flow pump installation form is double base inst...